GROUNDWORK — Replace a rear license-plate bulb Task: fit-license-plate-bulb | Content version 2.0.0 Source page: https://csl-12-auto-repair.pages.dev/tasks/fit-license-plate-bulb/ MODEL / APPLICABILITY [{"modelId":"fit-2015-us","market":"US","year":2015,"engine":"1.5L gasoline","configurations":["all","standard-key","smart-key","halogen","alloy"]}] EXCLUSIONS Other model years and markets; imported Jazz or Fit Hybrid; modified or aftermarket components with a different procedure. PREPARE [ ] Park in a safe place away from traffic. Work with the vehicle stationary, parking brake set and ignition off unless a step explicitly calls for a parked functional check. [ ] Does the fitted license-plate lamp match the manual’s tab-released lens, with lights off and cool? [ ] Keep children and pets away from tools, fluids and coin cells. Never enter underneath the vehicle. [ ] Good lighting [ ] Clean cloth [ ] Matching 5 W license-plate bulb verified against the original OBSERVE & RECORD Observation date: __________ Vehicle / equipment confirmed: __________ Record the affected lamp, matching 5 W bulb and whether the lens/socket clipped securely. Affected license-plate lamp: __________ Replacement marking and old-bulb comparison: __________ Lens/socket retention: __________ Parked lamp result: __________ | Choices: Illuminates; Still dark; Intermittent; Not tested Before care: __________ STEPS 1. [ ] Switch lights and ignition off and let the lamp cool. Confirm the original 5 W lamp and lens design. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=381 | PDF page 381 2. [ ] Push the lens to the left and pull the lens with its attached socket outward, as shown on printed page 379. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=381 | PDF page 381 3. [ ] Squeeze the tabs at both sides of the socket to separate the lamp assembly. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=381 | PDF page 381 4. [ ] Remove the old bulb and insert the matching new 5 W bulb. Reassemble the socket and lens so the retention tabs engage. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=381 | PDF page 381 5. [ ] Turn the lights on for a stationary function check, then switch them off. If the lens is insecure or the lamp remains dark, seek inspection. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=381 | PDF page 381 6. [ ] Record the affected lamp, matching 5 W bulb and whether the lens/socket clipped securely. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=381 | PDF page 381 DECISION CHECKS Does the fitted license-plate lamp match the manual’s tab-released lens, with lights off and cool? Yes — ready for this check → Continue with the steps, stopping if the real component differs from the manual. Not yet / not sure → Preparation saved. Return when the condition is confirmed; leave the vehicle untouched. Broken lens, corroded socket or an aftermarket LED assembly → Dark lamp, damaged tabs, leakage or corrosion: arrange service. What did the lamp check show? Lamp illuminates and lens / tabs are secure → Does the lamp illuminate with its lens and socket securely retained? Dark lamp, damaged tabs, leakage or corrosion: arrange service. → Dark lamp, damaged tabs, leakage or corrosion: arrange service. I have only prepared the plan → Plan prepared; no physical maintenance result recorded. Does the lamp illuminate with its lens and socket securely retained? Light works; lens and socket retained → Lamp illuminates and lens / tabs are secure The observation or repeat check is still incomplete → Plan prepared; no physical maintenance result recorded. Still dark, intermittent or retention uncertain → Dark lamp, damaged tabs, leakage or corrosion: arrange service. RECHECK Does the lamp illuminate again with the lens retained and no renewed dark or intermittent result? After care: __________ Retest: not checked / improved / unchanged / worse If an earlier condition changes, reassess the later checks and result. RESULT CHECK What did the lamp check show? Lamp illuminates and lens / tabs are secure Record only the result you actually observed. A saved web checklist is not confirmation that a vehicle has been repaired. Does the lamp illuminate with its lens and socket securely retained? Does the lamp illuminate again with the lens retained and no renewed dark or intermittent result? STOP CONDITIONS Broken lens, corroded socket or an aftermarket LED assembly Dark lamp, damaged tabs, leakage or corrosion: arrange service. A part, label, connector or fastener differs from the cited manual; access requires raising the vehicle; you cannot identify the correct component. SERVICE HANDOFF Take the recorded observations, their dates and any actual work history to the service provider. Dark lamp, damaged tabs, leakage or corrosion: arrange service. Notes: __________ SOURCES 2015 Honda Fit Owner’s Manual — Rear License Plate Light Bulbs, printed p.379 https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=381 | PDF page 381 Source checked 2026-10-04 Copyright retained by manufacturer; factual reference only. Original wording and schematic; no OEM images or manual redistribution. This blank plan records no completed maintenance or verified repair.