GroundworkCare you can keep track of.
Back to all tasks

2015 Honda Fit · US · Wipers and glass

Replace rear wiper blade rubber

The rear holder uses transferable retainers and a pivot attachment.

Retainers are highlighted within an abstract rear rubber blade, then shown separately for transfer to replacement rubber. No exact arm angle, retainer profile or blade length is supplied.
Original schematic. Honda transfers the rear blade’s retainers into the new rubber; missing or damaged retainers change the repair path. Manual reference

1 Confirm your vehicle

For 2015 Honda Fit · US, 1.5L gasoline. Confirm the original component against the cited manual.

Select and confirm your vehicle before starting.

Help identify your model and equipment
What is excluded?
  • Other model years and markets; imported Jazz or Fit Hybrid; modified or aftermarket components with a different procedure.

2 Prepare

You can save preparation while your vehicle or equipment is still unconfirmed.

YOUR OBSERVATIONS

Keep the before and after.

Only on this device

Record retainer transfer and rear blade engagement separately from the final wiping result.

Does the rear assembly remain engaged and wipe wetted glass without scratching after the check?

3 Follow the steps

Confirm compatibility and choose the readiness branch before recording steps.

  1. Manual reference · PDF page 384 Manual reference · PDF page 129
  2. Manual reference · PDF page 384
  3. Manual reference · PDF page 385
  4. Manual reference · PDF page 385
  5. Manual reference · PDF page 129
  6. Manual reference · PDF page 129

4 Check the result

  • What did the rear wipe test show?
  • Retainers and blade secure, wiping without scratching or detachment
  • Record only the result you actually observed. A saved web checklist is not confirmation that a vehicle has been repaired.
  • Were retainers and engagement confirmed before a satisfactory wet-glass result?
  • Does the rear assembly remain engaged and wipe wetted glass without scratching after the check?

Select what you actually observed. If you have only prepared the plan, record that instead.

Stop and get help if

  • Bent arm, missing retainer or a different aftermarket attachment
  • Missing retainers, loose blade or poor fit: stop and obtain the correct part / service.
  • A part, label, connector or fastener differs from the cited manual; access requires raising the vehicle; you cannot identify the correct component.

Source & applicability

Original, AI-assisted plan based on owner-manual facts. No physical repair test or manufacturer endorsement is claimed. Content version 2.0.0.

All observation paths

Does the rear holder match the pivot design on printed pages 382–383, with intact retainers?

  • Yes — ready for this check: Continue with the steps, stopping if the real component differs from the manual.
  • Not yet / not sure: Preparation saved. Return when the condition is confirmed; leave the vehicle untouched.
  • Bent arm, missing retainer or a different aftermarket attachment: Missing retainers, loose blade or poor fit: stop and obtain the correct part / service.

What did the rear wipe test show?

  • Retainers and blade secure, wiping without scratching or detachment: Were retainers and engagement confirmed before a satisfactory wet-glass result?
  • Missing retainers, loose blade or poor fit: stop and obtain the correct part / service.: Missing retainers, loose blade or poor fit: stop and obtain the correct part / service.
  • I have only prepared the plan: Plan prepared; no physical maintenance result recorded.

Were retainers and engagement confirmed before a satisfactory wet-glass result?

  • Retainers present; blade secure and wiping: Retainers and blade secure, wiping without scratching or detachment
  • The observation or repeat check is still incomplete: Plan prepared; no physical maintenance result recorded.
  • Missing retainer, loose pivot or scratching: Missing retainers, loose blade or poor fit: stop and obtain the correct part / service.

All observation paths

Does the rear holder match the pivot design on printed pages 382–383, with intact retainers?

  • Yes — ready for this check: Continue with the steps, stopping if the real component differs from the manual.
  • Not yet / not sure: Preparation saved. Return when the condition is confirmed; leave the vehicle untouched.
  • Bent arm, missing retainer or a different aftermarket attachment: Missing retainers, loose blade or poor fit: stop and obtain the correct part / service.

What did the rear wipe test show?

  • Retainers and blade secure, wiping without scratching or detachment: Were retainers and engagement confirmed before a satisfactory wet-glass result?
  • Missing retainers, loose blade or poor fit: stop and obtain the correct part / service.: Missing retainers, loose blade or poor fit: stop and obtain the correct part / service.
  • I have only prepared the plan: Plan prepared; no physical maintenance result recorded.

Were retainers and engagement confirmed before a satisfactory wet-glass result?

  • Retainers present; blade secure and wiping: Retainers and blade secure, wiping without scratching or detachment
  • The observation or repeat check is still incomplete: Plan prepared; no physical maintenance result recorded.
  • Missing retainer, loose pivot or scratching: Missing retainers, loose blade or poor fit: stop and obtain the correct part / service.

Related plans